Care And Maintenance Of A Vane Pump

Many industries, such as the automotive industry and the pharmaceutical industry, make use of the vane pumps for different procedures in production.

Its suitability in terms of application to these industries is primarily hinged on their ruggedness and durability.  

However, it would be best if you shopped for a quality vane pump from a reliable and trusted vane pump manufacturer.  In addition to this, you must have the right grasp of the correct way of operating it.

Here are five tips put together for you to understand the operation of a vane pump.

1. Use Quality Filters

In a workshop that is not dust-free, it is vital to get a high-quality filter to prevent these particulates from gaining access to the pump system.

2. Use the Gas Ballast

Whenever a vane pump is operated at normal atmospheric pressure, some water vapour will escape into the vacuum chamber.

Once the vapour gets into the vacuum system, it causes severe functional defects such as hindering your pump from getting to the maximum pressure.

A fatal consequence is when it gains access into the oil seal as contaminants. It can result in a system failure.

To prevent these occurrences, the gas ballast must be operated at the same time with the pump to make sure that all the water vapour is completely emptied.

3. Don’t Restrict the Exhaust Line

The function of a vane pump can be affected when there is blockage of the exhaust line of the pump. Somebody may not instantly notice this problem, but with time it becomes evident.

Blockages or restriction of the exhaust could make the pump to function abnormally by either reducing the pumping strength, i.e. pumping sluggishly or not kicking off at once.

A more chronic effect of blockage to the exhaust channel is overheating, which can lead to system failure if not looked into carefully.

To prevent the occurrence of these issues, you must continuously check the exhaust to avoid restriction or blockage caused by sediment build-up or mechanical means.

Implementing this routine upkeep check on the exhaust line of the pump will help keep the exhaust channel free from deposits.

Also, the pump has to be rightly positioned to allow for a sufficient venting of the system.

4. Eliminate Oil Mist

Smoke and oil mist from the vane pump’s exhaust is only a source of health hazard but also result in the pump’s damage.

To make sure your vane pump serves for a very long time as it were, buy the correct oil mist emptier for your pump for safe working.

5. Keep the Pump Cool

The construction of some vane pump is such that they air-ventilated.  

The design implies that they have to be kept in an area with plentiful air supply to reduce the pump's excessive heating.

For instance, it is not advisable to operate your vane pump in a closed area since the build-up of heat will ultimately cause the pump to crack.

In Need of A High-Quality Vane Pump?

These maintenance tips will invariably help to ensure that your vane pump fulfills in its service for a very long time to come. However, you must source for a very quality one.

For us here, we always deliver quality products that are next to none, and so you can be rest assured to get that best deal. Kindly contact us today for a smooth business transaction.